HTH Alkalinity Up Pool Treatment 1kg

R79.99

1

In case your 1st choice is out of stock...

Product Information

The HTH Alkalinity Up Pool Treatment 1kg effectively eliminates "pH bounce" by raising total alkalinity to protect pool surfaces and equipment from corrosion. This fast-acting solution ensures a stable, crystal-clear swimming environment and is safe for all pool linings.

The HTH Alkalinity Up Pool Treatment 1kg is a granular sodium bicarbonate-based chemical used to increase the total alkalinity of swimming pool water. It acts as a primary buffer, preventing rapid pH fluctuations and protecting mechanical equipment from acidic corrosion. This treatment ensures long-term water stability and improves the overall efficiency of chlorine sanitisers in residential pools.

 

Ideal Use and Performance

  • • pH Buffering: Effectively stabilises the water chemistry to keep total alkalinity within the recommended range of 80 to 120 ppm, preventing "pH bounce."
  • • Equipment Longevity: Prevents corrosive water conditions that cause etching on pool plaster and the premature rusting of metal ladders and pump components.
  • • Compatibility: This formula is safe for use across all pool linings, including concrete, fibreglass, and vinyl, and works with chlorine or salt-water systems.
  • • Rapid Dissolution: The fine granular texture is designed to dissolve quickly in water, leaving no chalky residue on the pool floor when applied correctly.

Safety Precautions

  • • Metal Protection: If your water contains heavy metals, it is advised to add a metal remover before adjusting alkalinity to prevent potential surface staining.
  • • Handling: Wear suitable protective gloves and eye protection; avoid breathing in the chemical dust when opening the 1kg container.
  • • Storage: Keep the product in a cool, dry place and ensure the lid is tightly sealed to protect the hygroscopic granules from moisture.
  • • Application Site: Do not pour the granules directly into the skimmer or weir; instead, add to a single spot at the deep end with the pump turned off.

Frequently Asked Questions

  • • How much should I add to my pool? As a baseline for a 50,000-litre pool, 1kg of HTH Alkalinity Up will raise the total alkalinity by approximately 10 ppm.
  • • Does it raise the pH as well? Yes, sodium bicarbonate will slightly raise your pH level, but its primary function is to increase and lock in the alkalinity.
  • • How long must the pump be off during application? After adding the product to the deep end, leave the pump off for 15 minutes before restarting to allow the chemical to settle and react.
  • • When can I re-test the water? For an accurate reading, wait at least 12 hours after application before testing the alkalinity levels again.

Clever Hack for pools

  • • To save money on balancing chemicals, use "The Deep End Method": pour your Alkalinity Up in one concentrated pile at the deep end with the pump off. This forces the chemical to react with the water volume more intensely, raising the alkalinity more effectively than scattering it across the surface.

Specification

Benefits & Features
  • Raises Total Alkalinity: Increases the total alkalinity in swimming pools, stabilising the pH balance and preventing rapid pH fluctuations.
  • pH Buffer: Acts as a buffer to maintain the correct pH level, making other pool chemicals more effective and reducing the frequency of pH adjustments.
  • Prevents Corrosion: Helps prevent the corrosion of pool surfaces and equipment caused by low alkalinity levels.
  • Improves Swimmer Comfort: A properly balanced pool reduces eye and skin irritation for swimmers.
  • Easy to Apply: The granular formula dissolves quickly for straightforward application directly into the pool water.
  • Compatible: Suitable for use with all types of pool surfaces and filtration systems.
Usage Instructions
  • Prevent Staining: Add 1 bottle of HTH metal remover and follow label directions to prevent possible staining from metals in the water.
  • Adjust PH: Adjust the pH level to 7.2 using HTH easy acid or HTH dry acid.
  • Add HTH: With the pump off, add 1 kg of HTH alkalinity up to one spot in the deep end of the pool.
  • Rest Pool: Leave the pump off for 15 minutes.
  • Resume Filtration: Switch the pump on and continue with normal filtration.
  • Check Level: After 12 hours, check the total alkalinity (TA) level.
  • Repeat Process: If necessary, repeat the process of adding HTH alkalinity up until the ideal range is reached.
Ingredients
Sodium Bicarbonate
Warnings
HTH® Alkalinity Up is harmful if swallowed and should be kept out of reach of children. Avoid contact with eyes and skin; rinse immediately and seek medical advice if exposed. Do not mix with other pool chemicals, as this may cause a dangerous reaction. Store in a cool, dry, well-ventilated area, away from heat and direct sunlight. Always read the label and follow instructions carefully to ensure safe and effective pool treatment.
Colour
Multicolour
Product Type
Chemicals
Usage
Alkalinity
Warranty Type
No Warranty
What's in the box?
1 x 1kg Alkalinity Up Pool Treatment

Check Out More: