HTH Stain Lift & Prevent 1kg

R179.99

1

In case your 1st choice is out of stock...

Product Information

Restore your pool’s aesthetic with HTH Stain Lift & Prevent 1kg, the dual-action system that removes unsightly metal marks and stops them from returning. This 2-step treatment is specifically formulated to lift iron and copper stains from linings while preventing re-deposition for a crystal-clear finish.

The HTH Stain Lift & Prevent 1kg is a specialised two-step pool treatment kit designed to eliminate localised metallic stains and prevent their recurrence.

The system includes one pouch for lifting iron and copper deposits from pool linings and a second pouch to catch dissolved metals, ensuring they do not re-deposit on surfaces during water rebalancing.

 

Product Specifications and Features

  • • Dual-Pouch System: Contains one Stain Lift pouch and one Stain Prevent pouch, providing a sequential chemical process that first releases metal bonds and then locks them in solution.
  • • Metal Target Profile: Specifically formulated to neutralise iron and copper stains, which are common in pools using borehole water or where low pH has caused equipment corrosion.
  • • Surface Compatibility: Safe for use on marbelite, fibreglass, and vinyl linings, though it is not recommended for black or very dark-coloured plaster finishes.
  • • Concentrated Treatment: A single 1kg kit is sufficient to treat up to 50,000 litres of pool water, making it a cost-effective alternative to a full drain and acid wash.
  • • Chelating Action: The "Prevent" stage uses sequestering agents that wrap around metal ions, preventing them from reacting with chlorine and forming new stains.
  • • Fast-Acting Results: Noticeable lifting of surface stains can often be observed within 3 to 4 hours of localised application, provided the water is correctly pre-balanced.

Ideal Use Cases

  • • Borehole Water Pools: Essential for South African homes that top up pools with borehole water, which typically has a high concentration of dissolved minerals and metals.
  • • Post-Corrosion Recovery: Ideal for restoring pool aesthetics after a period of low pH or low alkalinity has caused copper leaching from heater elements or pipework.
  • • Localised "Spot" Cleaning: Can be applied directly to stubborn brownish or greenish marks on steps and floor areas to lift concentrated metallic blemishes.
  • • Pre-Season Preparation: A proactive treatment to ensure the pool lining is pristine before moving into the high-usage summer months or hosting guests.

Safety and Storage Precautions

  • • Swimmer Exclusion: Do not allow anyone to swim during the treatment process; ensure the full 48-hour cycle (lift and prevent phases) is complete and water is rebalanced first.
  • • Avoid Mixing: Never mix these pouches with chlorine or other chemicals outside the pool water; add them directly to the pool as per the instructions to avoid toxic gas release.
  • • Handling Protection: Wear protective gloves and eye protection; the fine dust from the granules can cause serious respiratory and eye irritation if inhaled or touched.
  • • Proper Storage: Keep the container tightly sealed and upright in a cool, dry place away from direct sunlight, acids, and strong oxidisers.

Frequently Asked Questions

  • • How long must the pump run? The pump should be set to circulate continuously for 24 hours after adding the "Lift" pouch, and another 24 hours after the "Prevent" pouch.
  • • Can I use this for organic stains? No, this product is for metal stains only; marks from leaves, algae, or mud require a different treatment like HTH Metal Remover or a shock dose.
  • • Do I need to adjust my pH first? Yes, for the "Lift" phase to be effective, you must lower your pH to between 6.8 and 7.2 before adding the granules.

Clever Hack: The "Nylon Stocking" Spot Test

  • • To confirm if your stain is metallic before buying the kit, place a few granules of HTH Stain Lift into an old nylon stocking and hold it against the stain for two minutes.
  • • If the mark lightens or disappears, it is a metal stain and this product will work perfectly; if it doesn't change, the mark is likely organic (like algae or leaf tannin) and requires a chlorine-based shock instead!

Specification

Benefits & Features
  • Stain Prevention: Prevents the formation of stains caused by dissolved metals like iron and copper.
  • Stain Removal: Lifts and removes existing stains from pool linings, restoring a clean appearance.
  • Metal Control: Effectively controls and neutralises dissolved iron and copper levels in the water.
  • Residue Prevention: Inhibits stains from re-depositing on pool surfaces, maintaining long-term cleanliness.
Usage Instructions
  • Adjust pH Levels: Adjust the pool's pH to a range of 6.8 to 7.2. After treatment, adjust pH levels to between 7.2 and 7.6. Ensure the total alkalinity is within the 80 to 120 ppm range.

  • Initial Application: Brush the affected areas. Add the contents of the Stain Lift pouch around the sides of the pool, especially on noticeable stains. Set the pool pump to circulate and run for 24 hours.

  • Stubborn Stains: Turn the pump off and apply the contents of the Stain Lift pouch directly to stubborn stains. After 3-4 hours, turn the pump on to circulate and run for 24 hours.

  • Preventative Treatment: To prevent stains from re-depositing, add the contents of the Stain Prevent pouch. Run the pump continuously for an additional 24 hours.

Ingredients
Sodium Sulphite, Citric Acid
Warnings
The product is not suitable for pools with black or dark-coloured plaster linings. Do not mix this product with any substance other than water, and avoid contact with heat, strong oxidisers, and acids.
Colour
Multicolour
Product Type
Chemicals
Usage
Water Clarity
Warranty Type
Supplier Warranty
Warranty Period
12 Months
What's in the box?
1 x 1kg Stain Lift & Prevent Pack

Check Out More: