PoolBrite Soda Ash 500g

SAVE R25

R24.99

R49.99

Deal expires 27 Dec 2026

1

In case your 1st choice is out of stock...

Product Information

Quickly correct low pH levels with PoolBrite Soda Ash 500g, the essential chemical balancer for preventing eye irritation and equipment corrosion. This fast-acting powder efficiently raises water alkalinity to ensure a comfortable and safe swimming environment for your household.

PoolBrite Soda Ash 500g is a high-purity sodium carbonate compound designed to increase the pH levels and total alkalinity of swimming pool water.

This essential chemical treatment stabilises water chemistry to prevent acidic conditions that cause skin discomfort, eye stinging, and the gradual degradation of pool surfaces and metal mechanical components in residential pools.

 

Product Specifications and Features

  • • Chemical Composition: Consists of concentrated sodium carbonate in a dry, white powder form for rapid dissolution and immediate chemical reaction.
  • • Alkalinity Correction: Acts as a powerful base to neutralise acidity, helping to maintain the ideal pH range of seven point two to seven point six.
  • • Corrosion Protection: Effectively stops acidic water from etching marbleite or plaster finishes and prevents the pitting of stainless-steel pool ladders and heat exchangers.
  • • Sanitiser Enhancement: Creates the optimal chemical environment for chlorine to work at maximum efficiency, reducing overall chemical wastage and maintenance costs.
  • • Quantity: Packaged in a five hundred gram container, providing a precise amount for smaller corrective adjustments or maintenance of smaller water volumes.

Ideal Use and Application

  • • Testing Requirement: Always use a reliable test kit to measure current pH levels before application; only add soda ash if the reading is below seven point two.
  • • Standard Dosage: As a general guide, fifty grams of soda ash will typically raise the pH of a ten thousand litre pool by approximately zero point two units.
  • • Application Method: Pre-dissolve the required amount in a plastic bucket of pool water before pouring the slurry evenly around the perimeter of the pool.
  • • Circulation: Ensure the pump and filtration system are running during and for at least four hours after application to distribute the chemical thoroughly.
  • • Incremental Adjustment: For large corrections, add the product in stages and re-test the water after six hours to avoid over-correcting and causing cloudy water.

Safety and Storage

  • • Inhalation and Contact: Avoid breathing in the fine dust; wear gloves and eye protection to prevent irritation to the skin, eyes, and respiratory tract.
  • • Storage Environment: Store the container in a cool, dry area away from direct sunlight and moisture to prevent the powder from clumping or hardening.
  • • Chemical Separation: Keep strictly away from pool acids and chlorines; never mix dry chemicals together as this can trigger a dangerous chemical reaction.

Frequently Asked Questions

  • • Why is my water cloudy after adding soda ash? Temporary cloudiness is common if the alkalinity rises too quickly or if the water has high calcium hardness; it usually settles within twenty-four hours.
  • • Can I swim immediately after adding this? It is recommended to wait at least thirty to sixty minutes for the chemical to disperse and for the pH to stabilise before swimming.
  • • Is this the same as bicarbonate of soda? No, soda ash is sodium carbonate, which has a much stronger effect on raising pH than sodium bicarbonate, which is primarily used for alkalinity.

Specification

Benefits & Features
  • Raises pH Level
    Increases the pH of pool water.
  • Granular Formula
    A powdered granular form for easy dissolution.
  • 500g Pack Size
    Convenient small size for minor adjustments.
  • Corrects Low pH
    Used to raise pH levels that are too low.
  • Balances Water Chemistry
    Helps maintain ideal pool water balance.
Usage Instructions
  • Raise pH Level: A 500g pack of PoolBrite Soda Ash raises the pH level of a swimming pool. The ideal pH range is between 7.2 and 7.6.
  • Dosage Instructions: Use 50g of soda ash per 10,000 litres of pool water to increase the pH by 0.1. Add the required amount to a bucket of water and dissolve it completely before adding it to the pool.
  • Application: Slowly pour the dissolved mixture around the edges of the pool with the pump running to ensure even distribution. Avoid adding the product directly into the weir or skimmer.
  • Wait Time: Allow the pool water to circulate for at least two hours after adding the soda ash. Recheck the pH level after a full circulation cycle.
  • Safety Precautions: Handle the product with care. Wear appropriate personal protective equipment, such as gloves and eye protection. Store the product in a cool, dry place away from children and pets. Do not mix with other pool chemicals.
Warnings
PoolBrite Soda Ash 500g is a hazardous chemical and should be handled with care. Keep it out of the reach of children and animals, and avoid contact with skin and eyes. In case of accidental contact, rinse thoroughly with water and seek medical attention if irritation persists. Do not swallow the product and ensure proper ventilation when handling. Store the container in a cool, dry place away from other chemicals. Always read the instructions on the packaging before use and wear appropriate protective gear.
Colour
Multicolour
Product Type
Pool Cleaners
Usage
pH Balance
Warranty Type
No Warranty
What's in the box?
1 x 500g Soda Ash Pack